편리한 호스팅 미소IDC

   
 
 
 

      1차 네임서버 :
      ns1.misoidc.com
      101.79.73.101

      2차 네임서버 :
      ns2.misoidc.com
      101.79.73.105

      어제 : 237 ,오늘 : 130
      전체 : 1,007,187


     

 

 
작성일 : 11-06-28 12:00
Force10 OS 펌웨어 업그레이드
 글쓴이 : 싼웹호스팅
조회 : 19,045  

Force10 OS 버젼중 6.5.4.0 대 버젼에서

497Day 버그(시스템 uptime 497일이 되면, 제어부가 리셋되는 현상) 830day 버그

(시스템 uptime 830일이 되면 시스템이 rebooting 되는 현상)과 관련하여 FTOS 업그레이드가 필요한 버젼입니다.

업그레이드 관련해서는 첨부된 릴리즈노트를 참조하셔서 진행하세요. 특히 6.5 à 7.7 이상 버젼으로 업그레이드시 다음 사항 참조.

Software Upgrade on an E-Series
To copy a new FTOS image and change boot parameters in a chassis with only one RPM, follow the procedure
below. The FTOS image is labeled FTOS-EF-w.x.y.z.bin (where w, x, y, and z are replaced by the current release
numbers), for example FTOS-EF-7.7.1.0.bin. The Software Upgrade Procedure is modified to include the upgrade
of partition A and B of the RPM bootcode.
Note: If your bootflash images are 2.4.0.12 or lower, you must upgrade partition A and partition B of your bootflash images.

If you are upgrading from FTOS 7.x to 7.7.1.0, you do not need to perform the steps marked with asterisks.

4.* download alt-boot-image flash://image-name


EXEC Privilege Download the new boot image to alternative memory space.


5.* upgrade alt-bootflash-image rpm

EXEC Privilege Upgrade the non-booted CP, RP1,
and RP2 with the new bootcode.

Force10#copy tftp://host-ip/FTOS-EF-7.7.1.2b.bin flash:

Force10#dir

Force10#download alt-boot-image flash://FTOS-EF-7.7.1.2b.bin

Force10#upgrade alt-bootflash-image rpm

Force10#show bootvar
PRIMARY IMAGE FILE = flash://FTOS-EF-6.5.4.0.bin
SECONDARY IMAGE FILE = flash://FTOS-EF-6.5.4.0.bin
DEFAULT IMAGE FILE = flash://FTOS-EF-6.5.4.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = flash://FTOS-EF-6.5.4.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist

Force10#reload



 
 

Total 78
번호 제   목 글쓴이 날짜 조회
48 오라클 캐릭터 셋(CHARACTER SET) 변경하기(9i) 싼웹호스팅 11-29 21708
47 Alteon L4스위치 configuration 초기화 및 Dump 절차 싼웹호스팅 11-28 27865
46 오라클 폴더 퍼미션 싼웹호스팅 11-18 16372
45 mod_jk를 이용한 Apache2 + Tomcat5.5 연동 및 가상호스팅 싼웹호스팅 11-17 19697
44 아파치1 톰캣5 싼웹호스팅 11-16 45382
43 [CentOS] Tomcat 7.0.4 설치 (수정1) 싼웹호스팅 11-16 27899
42 Install Tomcat 7 on CentOS, RHEL, or Fedora 싼웹호스팅 11-15 19899
41 운영자개인자료 싼웹호스팅 11-06 6
40 오라클 계정생성 싼웹호스팅 11-02 21251
39 아파치 웹서버 무력화시킬 심각한 DoS 결함 발견 싼웹호스팅 10-20 20291
38 Oracle - sqlplus 로 접속하기, 계정생성, 테이블생성 싼웹호스팅 09-22 107703
37 centos에 oracle 11gR2 설치 싼웹호스팅 09-21 74414
36 백업 슈퍼블럭 확인하기 싼웹호스팅 07-21 16347
35 vsftp 에서 상위 폴더 이동 막기 싼웹호스팅 07-19 17712
34 Force10 OS 펌웨어 업그레이드 싼웹호스팅 06-28 19046
 1  2  3  4  5  6